Item Description:
100 brand new and high quality.
Material:AB Glue;
Size:Approx 9cm;
Color:as the picture;
Quantity:2Pcs;
Conversion :1 inch = 25.4mm or 1mm = 0.0393 inch
Waterproof and chemical resistant.
Bonds most materials to themselves or to one another.
Especially:
*metal
*wood
*glass
*ceramics
*rigid plastics
*concrete
How to use:
Make sure the surfaces to be joined are clean, dry and free from grease. Roughen smooth, glossy surfaces. Squeeze out equal amounts of Resin and Hardener. Mix thoroughly and use within 5 minutes (18-24degreec room temperature).
Features:
1. This product is a series of fast curing, viscous, acrylic adhesive color is blue and red;
2. It can be cured at low temperature or normal temperature, the curing speed is fast, and it can be cured in 5-8 minutes after deployment;
3. After curing, the bonding strength is high, the hardness is good, and there is a certain toughness
4. The cured product has good acid and alkali resistance, good moisture-proof, waterproof, oil-proof and dust-proof performance, and is resistant to humidity and heat aging;
5. The cured product has good electrical and physical properties such as good insulation, compressive strength, and high bonding strength.
Scope of application:
1. Any electronic or other products that need to be quickly bonded and fixed can be used;
2. It is suitable for self-adhesion or mutual adhesion of steel, iron, aluminum and other metals and rubber, plastics such as ABS, PVC, nylon, polycarbonate, polystyrene, plexiglass, etc., as well as ceramics, bakelite, slate, wood, etc.; Widely used in various oil, steam and water pipes and tanks for fast plugging and repairing without stopping; bonding and repairing of ship castings, alloy parts, and mechanical and electrical product parts; Assembly, sign sticking, etc. It is also suitable for bonding between T iron, magnetic steel and splint in the speaker industry.
Instructions:
1. The parts to be bonded and sealed need to be kept dry and clean;
2. Take doses A and B according to 1:1
3. Mix two groups of A and B with an appropriate amount of glue in a ratio of 1:1, immediately apply it to the surface of the adherend, and close it; you can also apply two groups of A and B to the two bonding surfaces, and slightly grind and mix Press back. It can also be applied with a special glue gun.
4. Acupressure curing at room temperature, positioning in 4 to 5 minutes, high temperature, fast positioning speed, otherwise, the speed is slightly slower. 1 hour to use strength, 24 hours to reach maximum strength.
5. During the curing process, please clean the containers and utensils used in time to prevent the glue from solidifying on the utensils.
Storage, transportation and precautions:
1. This product must be stored and transported according to the flammable product rules. The glue should be stored in a dry place in the shade. Good ventilation is desired in the glue application site.
2. The two groups of glues A and B should be strictly separated and cannot be in contact with each other, and the caps of the packaging bottles or toothpaste tube caps should not be wrongly covered, so as to avoid deterioration and cannot be used.
3. The storage guarantee period of this glue is one year, and it can still be used after passing the inspection.
The merchant warrants that their products comply with all applicable laws, and are offered only if they comply with Joom's policies and EU Product Safety and Compliance laws.
