Receiver parameters
1. Working voltage: 4-12v
2. Standby current: 7-9mA
3. Working current: 70-130mA
4. Relay specification: 20A (14VDC12A 120VAC 7A)
5. Maximum load: 10A
6. PCB size: 33 * 23 * 15mm
7. Shell size: 46 * 30 * 22mm
How to adjust the working mode:
Regarding working methods:
Change working mode through learning keys
Jog: Press the learn button once to quickly flash the LED light once, then press the transmit button again to flash the LED light once,Learning success.
Self locking: Press the learn button twice, the LED light flashes quickly twice, and then press the transmit button, the LED light flashes once,Learning success.
Interlock: Press the learn button 3 times, the LED light flashes 3 times, and then press the transmit button, the LED light flashes 1 time,Learning success.
Delay for 5 seconds: Press the learn button 4 times, the LED light will flash 4 times, and then press the transmit button, the LED light will flash 1 time,Learning success.
Delay of 10 seconds: Press the learn button 5 times, the LED light will flash 5 times, and then press the transmit button, the LED light will flash 1 time,Learning success.
Delay of 60 seconds: Press the learn button 6 times, the LED light will flash 6 times, and then press the transmit button, the LED light will flash 1 time,Learning success.
Clear code: Press and hold the learn button until the LED light quickly flashes 5 times and no longer flashes. If the code is cleared successfully, all remote controls will become invalid
Remote control parameters
1. Emission distance: 10-50M
2. Battery model: CR2016 2-piece button cell
3. Size: 60 * 30 * 12mm
4. Material: Metal
Material:Other material
Code Way:Fixed Code
Adapt To The Country Area:Used Globally
Power Supply:Hard-Wired
Acceptable Voltage Range:Below 50V
