M420T Ethernet Remote IO Module Data Acquisition Collector TCP Ethernet Port + RS485 + 16DO

Feature: 1. Support 16?channel digital output (DO). DO output supports triode sink output, the first channel can be used as high?speed pulse output, supporting pulse frequency 10Hz?300KHz. 2. DC9?36V wide working voltage, with anti?reverse connection protection. It adopts industrial?grade 32?bit chip, built?in watchdog, and has perfect anti?thunder protection and anti?interference measures. 3. 1 isolated 10/100M adaptive Ethernet interface with 15KV ESD protection. 1 RS485 communication interface supports standard RTU protocol for expansion. 1?way DC power supply output to other devices on site, reducing the difficulty and cost of on?site wiring. 4. It can be managed and configured through the LAN connection configuration software, which is easy to operate and maintain. With LED lights to display the working status, with a reset button to reset, easy on?site installation and debugging. 5. IP30 protection grade, high?quality metal casing, safe isolation of casing and system, especially suitable for industrial control field applications. Small size, support wall?mounted installation or DIN35mm industrial rail installation. 6. It is widely used in various industrial automated production, security monitoring systems, automated measurement and control systems. Users can use different I/O modules and expand the function through RTU, flexibly combine them into different I/O combination requirements, and provide users with a complete solution. Specification: Item Type: Ethernet Remote IO Module Material: Metal Size(LxWxH): Approx. 82 x 40 x 99mm/3.2 x 1.6 x 3.9in Typical Applications: Intelligent agricultural temperature and humidity data collection and monitoring; intelligent breeding temperature and humidity data collection and monitoring; temperature and humidity data collection and monitoring in warehouses and libraries; data collection and monitoring of weather station information; cold storage, fruit and vegetable storage rooms , industrial computer rooms, transformer cabinets and other temperature monitoring; other occasion where monitoring points are scattered; data transmission of solar monitoring systems, data collection and transmission of charging piles; data transmission of ATM, POS, electricity meters, PLC, DAQ and other equipment; smart grid data collection and control; Intelligent traffic data collection and control; Industrial automation data collection and control; Environmental protection data collection and control Power Supply : Input Voltage: Output: 9-36VDC Power Consumption: Typical standby power consumption: less than 2W Power Output: 1 channel Output Voltage: 9-36V DC (equal to the input voltage) Output Current: 1500mA at 12V (maximum) Power Protection: Anti-reverse connection, ESD air: 15KV, surge: 4KV Ethernet: Ethernet Port Specifications: 1 x RJ45, 10M/100Mbps Network Port Protection: ESD contact: 8KV, surge: 4KV (10/1000us) Protocol: RTU, TCP, MQTT Serial Port: Number Of Serial Ports: 1 x RS485 Serial Port Baud Rate: 2400, 4800, 9600, 14400, 19200, 38400, 57600, 115200, 128000 Data Bits: 7, 8 Check Digit: None, Even, Odd Stop Bits: 0.5, 1, 1.5, 2 Protocol: RTU (slave), RTU (master) Serial Port Protection: ESD contact: 8KV surge: 4KV (8/20us) Digital Output: Quantity: 8 Channels Output Type: SINK Output Capacity: 500mA per contact Overvoltage Protection: 50VDC Pulse Output: The first DO supports pulse output function, pulse output frequency: 10Hz-300KHz Software Parameters: Network Protocol: IPV4, TCP/UDP, DNS, RTU, TCP, MQT Protocol Conversion: Support TCP and RTU protocol conversion Support RTU to MQTT and TCP to MQTT Indicator Light: Power supply, Link, RS485_RXD, RS485_TXD, IO port status User Configuration: PC software configuration, support WIN XP, WIN 7, WIN 8 and WIN 10 Mapping Data for Boolean: 300, 16 bits: 300 Registration Package: Support custom registration package How to Use: 1. Connect with routers, switches, HUBs and other interconnection switching equipment through straight-through cables, or connect with PCs and other terminal equipment through crossover cables, and make sure that the device and the computer are in the same local area network; 2. Connect the 9-36VDC power supply to the power terminal of the device, the PWR light is on, and the device will complete the initialization operation within a few seconds; 3. On the PC, open the configuration software, click "Device Search" to find the device, double-click the found device, and enter the password to log in (the default password is 1234). After the password is verified, you can set the parameters. Note: If the first connection is to connect to a PC through a crossover cable, the device IP will be 192.168.1.110, and you need to change the computer IP to 192.168.1.* to find the device. . Package List: 1 x Ethernet Data Acquisition Module1 x Rail Mounting Accessories Pack1 x Manual Scan Download Card Note: Please note that the new type and old type of this product will be sent randomly, and make sure you will not mind before ordering.