----------------------------------------------------------------------
【Voltage Compatibility】
When using electrical appliances, please note that they are designed for Japanese voltage specifications (90-110V), so if you use them with a different voltage, it may cause a malfunction.
【Plug Type】
Our products use Japanese plug types (A or B type).
Please use a conversion adapter if necessary.
【Important Note on Transformers and Adapters】
A transformer adjusts voltage to match your device’s requirements.
A conversion adapter only changes the plug shape and does not adjust voltage.
Using only a conversion adapter without a transformer may result in damage to the product.
【Liability】
We are not responsible for malfunctions or damages caused by improper use, such as operating the product without a transformer.
Kindly confirm these details before placing your order.
----------------------------------------------------------------------
Provides a convenient solution for changing the installation direction of 24-pin power cables with 90 degree L-turn right angle adapters. Mains cables can be installed at a 90 degree angle, eliminating the need for builders to wrap and wrap them. Fold the cables up and down on the motherboard to reduce the amount of cables needed in front of the motherboard tray.
Connector A: 24 pin male, Connector B: 24 pin female.
The adapter is a standard 24-pin connector, so it will work with all 24-pin ports on the motherboard.
The adapter is designed to change the installation direction of ATX24 pin cable. This adapter allows you to install a 24-pin power cable from vertical to horizontal.
The adapter is designed specifically for 24-pin ports to improve the connection between motherboard and PSU. You must install the adapter in stages to avoid shorting the pins and damaging the motherboard. Please remove the power cable, wait 10 seconds, and then install it.
ATX 24PIN 90 degree adapter provides a convenient solution for changing the installation direction of ATX 24 pin cable using a 90 degree L-shaped upward tilt angle adapter. Use this adapter to install a 24PIN power cord from vertical to horizontal. The right-angle ATX 24-pin adapter eliminates the need to wrap or fold cables back and forth on the motherboard. Solve the problem that the 24-pin power cord is too long to insert into the ATX 24-pin cable, and prevent accidental damage to the motherboard pins by inserting the 24P cable into the motherboard. Solve the problem of messy wiring inside the chassis, bad wiring at the bottom of the chassis, and vertical jamming of wires to block the hard disk drive. Connector A: 24 pin male, Connector B: 24 pin female. Note: 1. This adapter is specifically designed for 24-pin ports to improve the connection between motherboard and PSU. 2.The adapter should be installed in stages to avoid shorting the pins and damaging the main board. 3.Unplug the power cord, wait 10 seconds, then plug it back in.
